Brake 8 foot 18 gauge

Built to last AND to be rebuildable in the real world: Nose bar, clamp cams, entire clamp assembly, vertical guide assemblies, apron bushings, and the apron leaf are replaceable.
• 97” bending width 
• Openings at clamp ends allow forming three sides of 2" pan.
• 18ga mild steel capacity on 1 1/2” flange with apron angle installed.
• Super smooth cam action with near zero “clamp creep” to stay on your mark.
• Minimum reverse bend: 1/2".
• Beam set back adjustment: 1”
• Lift of beam: 2 1/4” at leading edge* 
• Six (6) adjustable truss rods for center alignment*
• Stop rod for repeat bends is included.
Bolt on radius bars are available from 1/16” through 1/2” radius (1/2” radius = 1” diameter).  OR, radius can be added to the leading edge of the nose bar. For larger radii, look into our Radius Brake.
Approximate shipping weight: 2040 lbs