Proformer Model
S4018 3foot. 4 inches
(40”)
18gauge. A real brake, with real clamping cams, beam set back adjustment, full 40" working length. Open back, so any length can extend out the back.18 gauge mild steel capacity on 1” flange with apron angle installed. The apron angle is designed to be removed and re-installed “upside down” to allow 1/2” minimum reverse bend with 1/2” flange on 22ga mild steel. Beam set back adjustment: 1” (additional set back may be ordered) Lift of beam: 1” at narrowest edge
Two (2) adjustable truss rods for center alignment
Openings at clamp ends allow forming three sides of a pan to depth of 1 3/8”
Weighs only about 100 lbs. for easier handling in the truck or on the job site.